List Price:

STANDARD CONTROL FEATURES:

Standard KV-2004  CNC control  with 11” TFT Screen display

0.0004” high resolution linear scales provide precision dual ram position feedback.

Bosch-Rexroth Closed-loop  proportional Hydraulic position control: repeatability at ± 0.0004”  and  parallelism at ±  0.0004”

Y1, Y2 Programmable independently in angle or position. Ram tilt capacity at  ±0.5”

Hydraulic Synchronized ram parallelism control compensates uneven force on the bend by means of hydra-electrical technique.

Programmable ram delay control at bending position under adjustable pressure

Servo CNC back gauge with precision ball screw and double linear guide way ensures high rigidity capability and high productivity speed. 

Back gauge position speed at 1000IPM, repeatability at  ± 0.002”

Automatic or programmable back gauge retract feature.

Auto and programmable pressure control

Programmable ram top stop and slow bending position

Programmable bending speed

Automatic conversion: Inch / mm

Promcam punch clamping system with quick release for less than 320Ton.

KV-2004 CONTROL FEATURES:

Interactive 2D graphic editor for work piece, parts and tool data entries

2D graphic display of machine frame, work-piece and tooling

2D graphic identification of optimum bending sequences

Automatic calculation of crowning tonnage

Automatically calculate back gauge position

Automatically calculate material thickness and offset back gauge position according to the bend

Optimum bend sequence and Collision detection:  Simulation and optimum bending sequence with back gauge position. The optimized bending sequence can be simulated in the graphic window prior to the actual production of a part and avoid costly damage or collisions.

Up to 4 tooling stations in each program: Excellent feature for various bending applications requiring different tooling setup  within a single job under one  program, no need to change  program  or re-set tooling

Machine set-up preparation for pre-drawing and testing new fixture

Programmable Y1, Y2 by position and angle

Unlimited  tool memory

Unlimited  job memory

Off-line programming system with similar user interface as CNC Control

Off-line programming system 2D profile view and simulation

Up /down load program and tooling data and machine parameters from USB port

Print-out capabilities

Keyboard interface adaptor

Built in Ethernet communication port for up/down load from office (require optional communication software)

Web enabled monitoring function for service, trouble shooting and data transfer  (require optional communication software)

QUALITY & VALUE STANDARD EQUIPMENT:

Masteel Crown Device for easy-adjusting tooling and machine wear intolerances

Deeper throat depth with swing up clearance allows full length bend over bed up to 12"

T- slotted bed for support arms or custom setups

2 - Front support arms

OPTIONAL EQUIPMENTS:

Delem control DA-56 or up model

Offline program software

Manuel WILA Anti-Deflection system,

Optional multi axis control: R, Z1, Z2 up to 6 axis

Motorized Wila Anti-Deflection System which operates automatically with DNC unit according to tonnage applied,

Hydraulic CNC crowning bed for automatic anti-deflection according to the tonnage

Safety light curtain

Laser protection system for die area,

Hydraulic top and bottom tool holding system,

Quick- set front sheet support arm with linear bearing rollers,

Hydraulic oil coolant,

Automatic slide greasing system,

Special throat depth (500,600 and 750 mm),

Special top and bottom tools