MBHSA-12320

MASTEEL CNC HYDRAULIC BRAKES

MBHSA-12320	List Price:

Max. Capacity Tons	320
Max. Bending Length	12'
Distance between Frames	122"
Height of Bed	36"
Bed Below Floor	__
Depth of Throat	12 – ¾"
Length of Ram Stroke	10"
Fast Approach Speed IPM	190
Press Speed IPM	19
Fast Return Speed IPM	188
Max. Open Height	20-1/2"
Main Motor	30
Back gauge Travel	28"
Weight Lbs	36,000
Dimensions L x W x H	150x 70x110

STANDARD CONTROL FEATURES:

Standard SIEMENS TP-700 control with 6" Touch Screen display

SIEMENS Two Axis CNC controls on back gauge and ram bending position

	Bosch-Rexroth Closed-loop proportional Hydraulic position control: repeatability standard at ± 0.0006", optional at ± 0.0004”
	Backgauge position control: Standard CNC backgauge: speed at 200 IPM as per Demo Video; repeatability at ± 0.003" Programmable backgauge retract feature

CNC bending angle control –Only inputs of bending angle, material thickness & die opening

Two-way bending calibration controls -allow inexperienced operator to achieve desired angles with no time consuming multiple test bends. Save on costly skilled labour and test bend material.

	By correction of test-bending angle, control system automatically sets itself to achieve desired angle.
	By correction of bending position calculated automatically by control system.

Dual ram position feedbacks with hydraulic Synchronized control compensates for uneven force on the bend

Tool memory for quick recall of tool setup

200 Job memory with average of 30 bends in each program

Programmable pressure control

Programmable ram delay control at bending position under adjustable pressure for bump bending or special heavy bending application

Maintenance plan auto-prompts service schedule

Operating hour meter

Operating prompts and Trouble shooting messages

Inch / MM conversion

OPERATING FUNCTION:

Ram speed control:

	Rapid approach and return speeds insure more efficient production.
	Slow bending speed for better control of bending accuracy

Ram stroke control:

	Programmable ram top stop limit for more efficient production
	Programmable slow working speed position and second stop position

Four Operating Modes:

	Jog mode: inching control of ram for tool setup
	Single mode: one full bend cycle per control input.
	Double stop mode: excellent for sight bend operations.
	Follow bend mode: easy to follow bending and ram return on large sheet or with crane handling

QUALITY & VALUE STANDARD EQUIPMENT:

Two axis back gauge

	One axis CNC control: X – axis
	One axis manual adjustment: R – axis
	Precision-made back gauge fingers

Fully equipped with Masteel tooling and clamping system.

	Floating-adjustable die clamping system for various die application
	Hardened and precision ground tool steel gooseneck punch: 53-58RC;100Ton/M(33Ton/Ft) capacity
	Hardened and precision ground Masteel 10 openings, 4-way die: HB190-260.

Masteel Crown Device for easy-adjusting tooling and machine wear intolerances

Deeper throat depth with swing up clearance allows full length bend over bed up to 12"

T- slotted bed for support arms or custom setups

2 - Front support arms

OPTIONAL EQUIPMENTS:
	Delem control DA-56 or up model
	Offline program software
	Manuel WILA Anti-Deflection system,
	Optional multi axis control: R, Z1, Z2 up to 6 axis
	Motorized Wila Anti-Deflection System which operates automatically with DNC unit according to tonnage applied,
	Hydraulic CNC crowning bed for automatic anti-deflection according to the tonnage
	Safety light curtain
	Laser protection system for die area,
	Hydraulic top and bottom tool holding system,
	Quick- set front sheet support arm with linear bearing rollers,
	Hydraulic oil coolant,
	Automatic slide greasing system,
	Special throat depth (500,600 and 750 mm),
	Special top and bottom tools

STANDARD CONTROL FEATURES:

OPERATING FUNCTION:

QUALITY & VALUE STANDARD EQUIPMENT:

OPTIONAL EQUIPMENTS: