EVL-20M
FEATURES
Fully enclosed splash guard
Hydraulic unit
Automatic lubrication system
Work light
Gear/ bearing lubrication and oil cooler control
Chip conveyor
Moveable vertical cross rail and mechanism
Coolant system with tank
Three color alarm light
Workpiece counter (FANUC standard)
Coolant through tool holder
Heat exchanger for electrical cabinet
Service tool box & tool kits
Chip trolley
Coolant gun & Air blast
20 bar CTS for milling
Table manual 4-jaw chuck (independent 4-jaw) with magnetic rotary encoder
Leveling adjustable block & seat pads (without J type bolts)
Tool holder(one piece type)
a. O.D/facing tool holder(40mm)
b. Boring tool holder(Ø80mm)
c. Long type Boring toolholder(Ø80mm)
d. Dummy cover
Request Quote on This Model
Select Machine Size/Model Here
SPECIFICATIONS
| MODEL | EVL-20M | |
| CAPACITY | UNIT | |
| Max. swing diameter | Mm(in) | 2500(98.42) |
| Max. turning diameter | Mm(in) | 2500(98.42) |
| Distance from bite holder end to table surface | Mm(in) | 0-1.800 (0-70.86) |
| Max. turning height | Mm(in) | 1750(68.89) |
| Max. workpiece weight | Kg | 15000 |
| TABLE | ||
| Table diameter (manual chuck) | Mm(in) | 2000(78.74) |
| Range of table speeds (low) | Rpm | 13-50 |
| Range of table speeds (high) | Rpm | 51-200 |
| Gear speed | Steps | 2 |
| Max. table torque | Nm | 55800 |
| ATC | ||
| ATC (automatic tool changer) | Set | 1 |
| Number of tool stations | - | 12 (random) |
| Tool type | - | BT-50 |
| Tool size | Mm(in) | 25/32/40(1/1.25/1.5) |
| Cross section of ram | Mm(in) | 240x240(9.44x9.44) |
| TRAVEL | ||
| Horizontal travel (X-Axis) | Mm(in) | -1270+1470(-50+57.87) |
| Vertical travel (Z-Axis) | Mm(in) | 1000(39.37) |
| Cross rail travel | Mm(in) | 1120(44.08), 4 steps (5 positions) |
| FEED RATES | ||
| Rapid rate (X) | m/min | 10 |
| Rapid rate (Z) | m/min | 10 |
| Cutting feed rate | Mm/rev | 0.001-50 |
| Feed override | % | 0-150 |
| MOTOR | ||
| Table main motor | Kw(hp) | a60HVi, 60/75kw(80.4/100.5HP) |
| Feed servo motor (X-Axis) | Kw(hp) | a30i, 7 (9.4) |
| Feed servo motor (Z-Axis) | Kw(hp) | a30Bi, 7 (9.4) |
| Milling motor | Kw(hp) | aP30i(15/18.5) |
| Cf axis motor | Kw(hp) | a30i, 7(9.4) |
| MACHINE | ||
| Floor space (LxW) | Mm | 8650x5500 |
| Machine Max. height (H) | Mm | 6800 |
| Machine weight | kg | 45000 |
Request Quote on This Model